Creality Ender 5 S1 3D Printer

creality-ender5-S1
Upgraded motion system for 2000mm/s² acceleration and up to 250mm/s (5 times) printing speed*. Feel the speed and passion of 3D printing now.
 
 Speedy to Realize Creative Ideas
 Higher Efficiency and More Eco-friendly
 Stand Firmly to Print Quality Models
 Direct Extrusion Adapted to Flexible Filaments
 Hotend Upgrade for High-temp Printing
 Get a Cool Model Promptly
 Explore with High-temp Filaments
 Quicker Expert-Level Calibration
 Straightforward Touch Screen UI
 Print in Multiple Ways
2,19900 AED
On backorder
alGadgets
The company that trade the best products based in UAE
+971-52-641-5575
Ask a question

Speedy to Realize Creative Ideas

Upgraded motion system for 2000mm/s² acceleration and up to 250mm/s (5 times) printing speed*. Each X/Y/Z axis is driven by a high-precision stepper motor. A steel transmission shaft to connect and sync the two Y-axis belts. High-torque Y-axis 42-48 motor for responsive and precise motion.

Higher Efficiency and More Eco-friendly

It slashes printing time for all types of models. Higher efficiency and less power consumption.

Stand Firmly to Print Quality Models

An all-metal cube frame goes with the classic Cartesian structure. The stability is enhanced by thick linear shafts, extra gussets, two cantilevers, and silicone bed mounts.

Higher Success Rate

100% success rate for 1,000-hour printing at 250mm/s high speed and 0.2mm layer height.

Direct Extrusion Adapted to Flexible Filaments

The all-metal "Sprite" direct extruder features dual gears of a 1:3.5 gear ratio. It delivers a powerful and uniform 80N extrusion force. Way better when printing with flexible filaments like TPU.

Hotend Upgrade for High-temp Printing

Titanium Alloy Heatbreak: Low thermal conductivity for blocking heat creep. Able to tame up to 300℃. Corrugated Heatsink: 2.5 times surface area that is rapidly air-cooled by a silent axial flow fan. Large Melting Chamber: 50mm³ melting chamber surrounded by a large 4000mm³ heater block.

Get a Cool Model Promptly

The special "Urus" air ducts channel the strong wind generated by a large 5015 fan to cool the freshly printed section directly. The deposited hot material will harden and bond up immediately, thus less drooping or warping caused by overheating. It gives better overhangs, bridges, and more details overall.

Explore with High-temp Filaments

A whole new world opens, as a variety of heat-resistant engineering plastic filaments are brought into the game. Regular Filaments: PLA, PETG, TPU High-temp filaments*: ABS, PC, ASA, HIPS

Quicker Expert-Level Calibration

Level the bed quickly by CR Touch auto-leveling and auxiliary leveling, or offset the Z-axis height at 0.01mm accuracy. Get the perfect first layer with less hassle.

Straightforward Touch Screen UI

4.3-inch touch screen featuring a wide viewing angle, sensitive response, and a tabbed user interface. A temperature PID control page is also added for easy adjustment.

Sticky and Bendable PC Build Surface

The PC spring steel sheet has two notches and a magnetic base for quick installation. The frosted PC surface is sticky to models. After printing, the model can be removed right away with a slight bend.

Electrical Safety and Reliability

Secure aviation connector. Encased 350W power adapter. And, no more loose wires and cables with the nylon wire harness sleeve. All for safety and tidiness

 

Molding Technology: FDM
Build Volume: 220*220*280mm
Product Dimensions: 425*460*570mm
Package Dimensions: 528*474*340mm
Net Weight: 12.1kg
Gross Weight: 14.7kg
Extruder Type: "Sprite" dual-gear direct drive extruder
Extruder Material: All metal
Leveling Mode: CR Touch auto-leveling
Nozzle Type: Brass nozzle x1
Nozzle Diameter: Standard 0.4mm
Printing Accuracy: ±0.1mm
Layer Height: 0.05-0.35mm
Filament Diameter: 1.75mm
Nozzle Temperature: ≤300°C
Heatbed Temperature: ≤110°C
Build Surface: PC spring steel sheet
Power Loss Recovery: Yes
Filament Runout Sensor: Yes
Rated Voltage: 100-120V~, 200-240V~, 50/60Hz
Rated Power: 350W
File Transfer: SD card, USB Type-C cable
File Formats: STL, OBJ, AMF
Supported Filaments: PLA, PETG, ABS, TPU, PC, ASA, HIPS
Slicing Software: Creality Slicer, Creality Print, Cura, Repetier-Host, Simplify3D
UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Chinese
Brand Name
Creality
Find similar

No reviews found

Possibly you may be interested
  • Related Products
  • Recently Viewed