+971 52 641 5575
Explore Products

Catalog

Sort by:
Popular First
Show:
20
Creality Ender 5 Plus Tempered Glass Build Plate Replacement (377*370mm)
0.0
creality-ender5-plus-tempered-glass
Ender 5 PLUS Tempered Glass Upgraded Build Plate Printing Surface Experience Pro-hesion- Our state-of-the-art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. Can be placed on top of any existing hotbed surface and be held in place with simple clips As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.  
14900 AED
In stock
+ −
Save 33%
Insta360 Invisible Dive Case for X3
0.0
Key Features For Insta360 X3 Camera Invisible in 360° Video 164' Waterproof Depth, IPX8 Maintains Access to Button Controls 2-Prong Mount
59900 AED 39900 AED
You save: 200.00 AED
In stock
+ −
Autel Robotics EVO Nano +
0.0
Our smallest drone series to date, weighing in at 249 grams. The perfect tool for photographers and outdoor adventurers. 1/2-inch CMOS sensor capable of 48 MP photos 3-axis stabilized gimbal F/2.8 Aperture 10 km tri-band image transmission The first and only aircraft series of its size to offer an advanced obstacle avoidance system
3,29900 AED
In stock
+ −
Save 4%
DJI Avata Explorer Combo
0.0
Immersive Flight Experience Intuitive Motion Control 4K/60fps 155° Super-Wide FOV Videos Powerful Video Stabilization Weighs About 410 g, Lightweight and Portable Enhanced Safety with Built-in Propeller Guard 1080p/100fps video transmission quality: the lowest latency of 30 ms Dual 1080p Micro-OLED Screens
4,69900 AED 4,49900 AED
You save: 200.00 AED
In stock
+ −
Save 30%
DJI FPV Drone Combo
0.0
dji-fpv-combo
Pre-order now your dji FPV Drone Combo in Dubai - UAE CALL OR WHATSAPP US FOR FASTEST DELIVERY NOW - +97152641 5575 Immersive Flight Experience [1] 4K/60fps Super-Wide 150° FOV [2] 10km HD Low-Latency Video Transmission [3] Brand-New S Mode Emergency Brake and Hover [4]
5,29900 AED 3,69900 AED
You save: 1,600.00 AED
In stock
+ −
DJI Mini 4 Pro Fly More Combo (DJI RC 2)
0.0
Key Features Up to 4K100 Video & 48MP Raw Stills Omnidirectional Obstacle Avoidance Regulation-Friendly 8.8 oz Weight RC 2 Controller Included Up to 34 Minutes of Flight Time Rotating Gimbal for Vertical Shooting Up to 12.4-Mile Range with OcuSync 4 FocusTrack Subject Tracking System Automatic Shooting Modes Foldable Design for Easy Travel/Storage
3,99900 AED
Out of stock
Snapmaker Artisan 3-in-1 3D Printer with Enclosure
0.0
snapmaker-artisan
Artisan is our latest generation of 3-in-1 3D printer. Larger, stronger, and more accessible than ever, it's going to be your next desktop powerhouse.   Overall features: • 300°C dual extrusion 3D printing • 10W high power laser engraving and cutting • 200W CNC carving and cutting • Linear modules powered by industrial-grade transmission technology • 400 × 400 × 400 large work area • Quick-swap toolheads, platforms, and hot ends • 7" touchscreen with brand new UI • Free 3-in-1 software: Snapmaker Luban • All metal design to the next level • Laser-proof enclosure included   * 2 hot ends with 0.4 mm brass nozzles are included.
10,99900 AED
Out of stock
Creality LD-002R LCD Resin 3D Printer
0.0
creality-LD-002R-LCD-Resin-3D-printer
CREALITY LD-002R LCD Resin 3D Printer BUILD AND MOTION : Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis. ANTI-ALIASING ： MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out. QUICK LEVELING ： Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the  LD-002R  is quick leveling. Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare. PERFORATED PRINT PLATE ： Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it. AIR FILTER ： A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.  
1,29900 AED
In stock
+ −
Creality HALOT-SKY Resin 3D Printer
0.0
creality-HALOT-SKY-resin-3D-printer
Creality HALOT-SKY is a new generation of flagship resin 3d printers. Unlimited innovation drives resin printing future   Integral light source   AI hardcore   High agility slicing   High stability Z-axis   WiFi-APP intelligent control   OTA online upgrade
4,81200 AED
In stock
+ −
DJI Avata Fly More Kit
0.0
Cost-efficient, includes two Intelligent Flight Batteries and a Battery Charging Hub to provide sufficient power for your flights.
1,05900 AED
Out of stock
DJI Goggles Integra Motion Combo
0.0
Experience immersive FPV when you use DJI Goggles Integra along with the DJI RC Motion 2. Enjoy true-to-life colors, accurate details, and motion controls that make flying captivating.
2,59900 AED
In stock
+ −
DJI Matrice 30 RTK Drone
0.0
1 x Matrice 30 Drone 2 x TB30 /intelligent Flight Battery 1 x BS30 Battery Station 1 x RC Plus Remote Controller
31,99900 AED
In stock
+ −
Powerology 500W Portable Power Generator With 140400mAh Capacity
0.0
Features   45W USB-C PD & 18W USB-A QC 140400 mAh Capacity Solar Re-Charge Ability LCD Information Panel Built-in Protection 750W Max Surge High-density Battery pack Management System: MPPT charge controller, BMSspec 1
1,89900 AED
In stock
+ −
Save 56%
Insta360 X3 Lens Cap
0.0
Insta360-X3-lens-cap
Key Features Fits Insta360 X3 Compatible with Lens Guards Prevents Against Scratches & Dust Silicone Construction
8900 AED 3900 AED
You save: 50.00 AED
In stock
+ −
Creality 1KG Ender PLA Filament (Black)
0.0
creality-1KG-ender-PLA-filament-black
Creality Ender 3D Printer PLA Filament 1.75mm 1KG Spool High-quality PLA filament for your 3D printer. 1.75 mm in diameter, PLA filament, 1 Kg (2.2 lbs) net weight. Compatible with any 3D printer that uses 1.75mm diameter filament. Recommended Extrusion/Nozzle Temperature 180°C - 215°C. Dimensional Tolerance: +/- 0.02mm Color:  Red / Blue / White / Black / Grey
12900 AED
In stock
+ −
Creality 1KG Ender PLA Filament (Blue)
0.0
creality-1KG-ender-PLA-filament-b
Creality Ender 3D Printer PLA Filament 1.75mm 1KG Spool High-quality PLA filament for your 3D printer. 1.75 mm in diameter, PLA filament, 1 Kg (2.2 lbs) net weight. Compatible with any 3D printer that uses 1.75mm diameter filament. Recommended Extrusion/Nozzle Temperature 180°C - 215°C. Dimensional Tolerance: +/- 0.02mm Color:  Red / Blue / White / Black / Grey
12900 AED
In stock
+ −
DJI Mini 4 Pro (DJI RC 2)
0.0
Key Features Up to 4K100 Video & 48MP Raw Stills Omnidirectional Obstacle Avoidance Regulation-Friendly 8.8 oz Weight RC 2 Controller Included Up to 34 Minutes of Flight Time Rotating Gimbal for Vertical Shooting Up to 12.4-Mile Range with OcuSync 4 FocusTrack Subject Tracking System Automatic Shooting Modes Foldable Design for Easy Travel/Storage
3,30000 AED
In stock
+ −
Creality CR-10 Smart Pro 3D Printer
0.0
creality-CR-10-smart-pro-3D-printer
CREALITY NEW Direct Dual-Gear Extruding |Dual z-axis | Spring steel PEI magnetic sheet.   Smart Networking of Creality Cloud App   Dual-Mode Levelling   AI HD Camera   LED light installed   Full-metal Dual-gear Direct Extruder   Spring Steel PEI Magnetic Sheet
3,22900 AED
In stock
+ −
Insta360 GO 3 Action Kit
0.0
64A7C61670C85
The must-have kit for action sports. Action Kit includes 1x GO 3 (32GB), 1x Action Pod, 1x Lens Guard (pre-installed on the lens by default), 1x Magnet Pendant, 1x Pivot Stand, 1x Easy Clip and 1x Quick Release Mount. Note: If you have a pacemaker, please do not wear GO 3 on your chest, or use the Magnet Pendant due to its magnetism.

Internal Storage:

64GB 32GB 128GB
Internal Storage64GB
1,54900 AED
In stock
+ −
Add to cart
Save 11%
DJI Mini 3 Fly More Combo Plus Drone with DJI RC
0.0
Under 249 g Extended Battery Life 4K HDR Video True Vertical Shooting Intelligent Features 38kph (Level 5) Wind Resistance DJI RC (5.5-inch HD Display) Beginner-Friendly, Easy-To-Fly, and Easy-To-Use
3,59900 AED 3,19900 AED
You save: 400.00 AED
In stock
+ −
Show another 20 products
Product filters
Price

AED  –  AED

  • 0AED
  • 43999AED
Brands
    Show all (16)