All vendors :: alGadgets

Save 15%

DJI Cendence Remote Controller

0.0

CODE: DJI-Cendence-Remote-Controller

Provides up to five analog control channels and over ten customizable buttons, improving overall control efficiency. Cendence's design offers antenna interchangeability. A high-gain antenna, or DJI’s Tracktenna, can augment the power of DJI Lightbridge technology, significantly increasing overall anti-interference and image quality. HDMI, SDI, USB, and CAN ports provide robust expansion capabilities. Cendence comes with the fully integrated Cendence Monitor Mounting Bracket.

Brand NameDJI

4,699⁰⁰ ^AED 3,999⁰⁰ ^AED

You save: 700.00 AED

Out of stock

Save 11%

DJI Avata Pro View Combo with Goggles 2

0.0

CODE: dji-avata-pro-view-combo

Close-Up Filming Indoors or Outside Ultra-Wide 4K100p Stabilized Video Propeller Guards for Safe Flying Goggles 2 with 1080p Full HD Resolution DJI Motion Controller Included Up to 6.2-Mile Video Transmission Range Downward Sensing Obstacle Avoidance Emergency Brake & RTH Safety Features Up to 18 Minutes of Flight Time 3 Speed Modes from 17.9 to 60.4 mph

Brand NameDJI

5,499⁰⁰ ^AED 4,900⁰⁰ ^AED

You save: 599.00 AED

In stock

+ −

DJI Avata Intelligent Flight Battery

0.0

Provides approximately 18 minutes of flight time. Fly and shoot with more freedom and confidence.

Brand NameDJI

529⁰⁰ ^AED

In stock

+ −

DJI Avata FPV Drone

0.0

CODE: dji-avata-FPV-drone

Close-Up Filming Indoors or Outside Ultra-Wide 4K100p Stabilized Video Propeller Guards for Safe Flying Up to 6.2-Mile Video Transmission Range Downward Sensing Obstacle Avoidance Emergency Brake & RTH Safety Features Up to 18 Minutes of Flight Time 3 Speed Modes from 17.9 to 60.4 mph

Brand NameDJI

2,799⁰⁰ ^AED

On backorder

+ −

DJI Avata Fly Smart Combo

0.0

Immersive Flight Experience Intuitive Motion Control 4K/60fps 155° Super-Wide FOV Videos Powerful Video Stabilization Weighs About 410 g, Lightweight and Portable Enhanced Safety with Built-in Propeller Guard 10km 1080p Low-Latency Video Transmission

Brand NameDJI

4,999⁰⁰ ^AED

In stock

+ −

DJI Avata Fly More Kit

0.0

Cost-efficient, includes two Intelligent Flight Batteries and a Battery Charging Hub to provide sufficient power for your flights.

Brand NameDJI

1,059⁰⁰ ^AED

Out of stock

Save 4%

DJI Avata Explorer Combo

0.0

Immersive Flight Experience Intuitive Motion Control 4K/60fps 155° Super-Wide FOV Videos Powerful Video Stabilization Weighs About 410 g, Lightweight and Portable Enhanced Safety with Built-in Propeller Guard 1080p/100fps video transmission quality: the lowest latency of 30 ms Dual 1080p Micro-OLED Screens

Brand NameDJI

4,699⁰⁰ ^AED 4,499⁰⁰ ^AED

You save: 200.00 AED

In stock

+ −

DJI Avata 2 Two-Way Charging Hub

0.0

The Two-Way Charging Hub can charge three batteries in sequence. It can also serve as a mobile power bank to charge devices.

Brand NameDJI

Contact us for a price

Out of stock

DJI Avata 2 Propellers

0.0

Offer efficient and stable propulsion for the aircraft.

Brand NameDJI

Contact us for a price

Out of stock

DJI Avata 2 Intelligent Flight Battery

0.0

Provides approx. 23-min flight time. Get ready for immersive flying to create FPV footage more freely and confidently.

Brand NameDJI

Contact us for a price

Out of stock

DJI Avata 2 Fly More Combo (Three Batteries)

0.0

FPV Flight Experience Motion Control, Easy ACRO Tight Shots in Super-Wide 4K 1/1.3-inch Image Sensor Built-in Propeller Guard Binocular Fisheye Visual Positioning Turtle Mode Cinematic Magic with One Tap

Brand NameDJI

4,679⁰⁰ ^AED

In stock

+ −

DJI Avata 2 Fly More Combo (Single Battery)

0.0

DJI Avata 2 fly more combo in Dubai - Abu Dhabi - UAE FPV Flight Experience DJI Goggles 3 has HD micro-OLED displays and low video latency. It also has Real View PiP, for awareness without removing the goggles. Easy ACRO RC Motion 3 allows for stunning flying acrobatics simply...

Brand NameDJI

Contact us for a price

Out of stock

DJI Air 3 ND Filters Set (ND8/16/32/64)

0.0

Meets the need of shutter speed control during video recording.

Brand NameDJI

349⁰⁰ ^AED

In stock

+ −

DJI Air 3 Low-Noise Propellers

0.0

Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.

89⁰⁰ ^AED

In stock

+ −

DJI Air 3 Intelligent Flight Battery

0.0

Provides Air 3 with up to 46 minutes of flight time.

Brand NameDJI

599⁰⁰ ^AED

In stock

+ −

Save 10%

DJI Air 3 Fly More Combo (DJI RC-N2)

0.0

1/1.3″ CMOS Medium Tele & Wide-Angle Dual Primary Cameras 46-Min Max Flight Time Omnidirectional Obstacle Sensing DJI O4 20km HD Video Transmission Dual-Camera 48MP Photos Dual-Camera 4K/60fps HDR Videos

Brand NameDJI

4,850⁰⁰ ^AED 4,350⁰⁰ ^AED

You save: 500.00 AED

In stock

+ −

DJI Air 3 Fly More Combo (DJI RC 2)

0.0

1/1.3″ CMOS Medium Tele & Wide-Angle Dual Primary Cameras 46-Min Max Flight Time Omnidirectional Obstacle Sensing DJI O4 20km HD Video Transmission Dual-Camera 48MP Photos Dual-Camera 4K/60fps HDR Videos

Brand NameDJI

5,299⁰⁰ ^AED

In stock

+ −

DJI Air 3 Battery Charging Hub

0.0

It supports a new power accumulation function, expanded charging interface, and quick charging of devices like smartphones.

Brand NameDJI

249⁰⁰ ^AED

In stock

+ −

DJI Air 3 (DJI RC-N2)

0.0

1/1.3″ CMOS Medium Tele & Wide-Angle Dual Primary Cameras 46-Min Max Flight Time Omnidirectional Obstacle Sensing DJI O4 20km HD Video Transmission Dual-Camera 48MP Photos Dual-Camera 4K/60fps HDR Videos

Brand NameDJI

4,499⁰⁰ ^AED

Out of stock

DJI Air 2S ND Filters Set (ND64/128/256/512)

0.0

CODE: dji-air-2S-nd-filters-set-64

A combination of various filters gives you more creative freedom

Brand NameDJI

Contact us for a price

On backorder

DJI Air 2S ND Filters Set (ND4/8/16/32)

0.0

CODE: dji-air-2S-nd-filters-set-nd-4

Meet the needs of professional video recording.

Brand NameDJI

Contact us for a price

On backorder

DJI Air 2S Low-Noise Propellers

0.0

Longer, quieter flight.

Brand NameDJI

70⁰⁰ ^AED

In stock

+ −

DJI Air 2S Gimbal Protector

0.0

CODE: dji-air-2S-gimbal-protector

Provides protection for the gimbal and camera.

Brand NameDJI

Contact us for a price

On backorder

Save 7%

DJI Air 2S Fly More Combo

0.0

CODE: dji-air-2S-fly-more-combo

Buy Now DJI Air 2S Combo in Dubai - UAE Fly More Combo Accessories Included 20MP Stills or up to 5.4K Ultra HD Video 3-Axis Gimbal with 22mm Lens & 1" CMOS MasterShots Automated Themed Filming FocusTrack Subject Tracking Modes QuickShot Aerial Effects Hyperlapse Modes for Timelapse Videos 4-Antenna Remote with 7.5-Mile Range 4-Direction Obstacle Avoidance D-Log 10-Bit Color & 12.6-Stop RAW

Brand NameDJI

5,349⁰⁰ ^AED 4,999⁰⁰ ^AED

You save: 350.00 AED

In stock

+ −

DJI Air 2S

0.0

CODE: dji-mavic-air-2S

Buy Now DJI Air 2S in Dubai - UAE Compact & Foldable Design 20MP Stills or up to 5.4K Ultra HD Video 3-Axis Gimbal with 22mm Lens & 1" CMOS MasterShots Automated Themed Filming FocusTrack Subject Tracking Modes QuickShot Aerial Effects Hyperlapse Modes for Timelapse Videos 4-Antenna Remote with 7.5-Mile Range 4-Direction Obstacle Avoidance D-Log 10-Bit Color & 12.6-Stop RAW

Brand NameDJI

4,000⁰⁰ ^AED

In stock

+ −

DJI Agras T30 Agriculture Drone

0.0

CODE: dji-agras-T30

Request Quote Equipped with a large 30kg spray tank, the Agras T30 has a spray width of 9 meters, and field spraying efficiency of 40 acres/hour, 33.3% more than its previous generation.

Brand NameDJI

Contact us for a price

Out of stock

DJI Agras T20 Agriculture Drone

0.0

CODE: dji-agras-T20

Request Quote With its powerful performance and outstanding spraying capabilities, the T20 can conduct autonomous operations over a variety of terrains, such as broadacre farmlands, terraces, and orchards. New features, like an omnidirectional digital radar, have helped the T20 take stability and flight safety to the next level, providing users with highly efficient results.

Brand NameDJI

Contact us for a price

Out of stock

DJI Agras T16 Agriculture Drone

0.0

CODE: dji-agras-T16

Request Quote Optimized Power. Unrivaled Performance. The Agras T16 has an improved overall structure with modular design and supports the highest payload and widest spray width ever in a DJI agricultural drone. With powerful hardware, an AI engine, and 3D-operation planning, the T16 brings operation efficiency to a whole new level.

Brand NameDJI

Contact us for a price

Out of stock

DJI Agras T10 Agriculture Drone

0.0

CODE: dji-agras-T10

Request Quote The DJI Agras T10 brings a highly compact-yet-powerful aerial solution to agriculture sites of all sizes and needs. An 8 liter tank and spray width of up to 5 meters allow the aircraft to cover up to 15 acres/hour. [1] Its folding truss structure is sturdy and reliable, enabling efficient folding and unfolding, convenient transportation, and easy transitions.

Brand NameDJI

Contact us for a price

Out of stock

DJI Action 2 Power Combo

0.0

CODE: dji-action2-power-combo

Key Features Action 2 Magnetic 4K Camera Power Module with microSD Card Slot Up to DCI 4K60, UHD 4K120, 1080p240 Extends Runtime to 180 Minutes Magnetic Adapter Mount & Lanyard Waterproof to 33' without a Housing 1/1.7" CMOS Sensor, Wide 155° FOV RockSteady Digital Video Stabilization HorizonSteady Leveling Records to microSD/SDXC/SDHC Cards Request Quote

Brand NameDJI

1,599⁰⁰ ^AED

In stock

+ −

DJI Action 2 Dual-Screen Combo

0.0

CODE: dji-action2-dual-screen-combo

Key Features Action 2 Magnetic 4K Camera 1.76" Front-Facing Touchscreen OLED Up to DCI 4K60, UHD 4K120, 1080p240 4-Mic Matrix Stereo Audio with Zoom Extends Runtime to 160 Minutes Magnetic Adapter Mount & Lanyard Adhesive Ball Joint Adapter 1/1.7" CMOS Sensor, Wide 155° FOV Camera is Waterproof to 33' Image Stabilization & Horizon Leveling

Brand NameDJI

1,999⁰⁰ ^AED

Out of stock

Creality3D CR-X Dual Color

0.0

CODE: creality3D-CR-X-dual-color

Brand NameCreality

2,999⁰⁰ ^AED

Out of stock

Creality TPU Yellow Filaments 1KG

0.0

CODE: creality-TPU-yellow-filaments-1KG

Brand: Creality Model: CR-TPU Filament Diameter: 1.75mm Spool Outer Diameter: 20cm Spool Inner Diameter: 5.5cm Spool Height: 6.5cm Net Weight: 1kg Gross Weight: 1.29kg

Brand NameCreality

120⁰⁰ ^AED

In stock

+ −

Creality TPU White Filaments 1KG

0.0

CODE: creality-TPU-white-filaments-1KG

Brand: Creality Model: CR-TPU Filament Diameter: 1.75mm Spool Outer Diameter: 20cm Spool Inner Diameter: 5.5cm Spool Height: 6.5cm Net Weight: 1kg Gross Weight: 1.29kg

Brand NameCreality

120⁰⁰ ^AED

In stock

+ −

Creality TPU Red Filaments 1KG

0.0

CODE: creality-TPU-red-filaments-1KG

Brand: Creality Model: CR-TPU Filament Diameter: 1.75mm Spool Outer Diameter: 20cm Spool Inner Diameter: 5.5cm Spool Height: 6.5cm Net Weight: 1kg Gross Weight: 1.29kg

Brand NameCreality

120⁰⁰ ^AED

In stock

+ −

Creality TPU Green Filaments 1KG

0.0

CODE: creality-TPU-green-filaments-1KG

Brand: Creality Model: CR-TPU Filament Diameter: 1.75mm Spool Outer Diameter: 20cm Spool Inner Diameter: 5.5cm Spool Height: 6.5cm Net Weight: 1kg Gross Weight: 1.29kg

Brand NameCreality

120⁰⁰ ^AED

In stock

+ −

Creality TPU Blue Filaments 1KG

0.0

CODE: creality-TPU-blue-filaments-1KG

Brand: Creality Model: CR-TPU Filament Diameter: 1.75mm Spool Outer Diameter: 20cm Spool Inner Diameter: 5.5cm Spool Height: 6.5cm Net Weight: 1kg Gross Weight: 1.29kg

Brand NameCreality

120⁰⁰ ^AED

In stock

+ −

Creality TPU Black Filaments 1KG

0.0

CODE: creality-TPU-black-filaments-1KG

Brand: Creality Model: CR-TPU Filament Diameter: 1.75mm Spool Outer Diameter: 20cm Spool Inner Diameter: 5.5cm Spool Height: 6.5cm Net Weight: 1kg Gross Weight: 1.29kg

Brand NameCreality

120⁰⁰ ^AED

In stock

+ −

Creality Tempered Glass Build Plate for Ender 3 (Pro)/Ender 3 V2/Ender 5 ( 235*235mm)

0.0

CODE: creality-tempered-glass-build-plate-ender3

235*235*4mm Creality Ender 3 Glass Bed Upgraded Version Excellent adhesion: Creality art carbon and silicone build surface provide the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. Convenient to use: The new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Clean with water. Easy to remove your print by hand or with a scraper. Customized Designed: Designed with a small Creality logo at the bottom of Tempered Glass to both avoid logo printing marks and remind the model of the printer platform. High-performance: As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues. Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃. Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3X，Ender-3 V2， Ender 5, Ender-5 Pro, Notice: The Tempered Glass Build Plate is shipped randomly with the Creality logo and without the logo

Brand NameCreality

99⁰⁰ ^AED

On backorder

+ −

Creality Sermoon D1 3D Printer

0.0

CODE: creality-sermoon-D1-3D-printer

Sermoon D1 3D Printer, a transparent and elegant 3d printer. Modular structure to experience the enclosed machine. Enjoy the DIY fun. Features Industrial-grade printing Exquisite appearance Transparent design Dual-Z axis screw Variable voltage power supply Excellent nozzle structure All-metal extrusion Smart sensor Silent mainboard

Brand NameCreality

2,799⁰⁰ ^AED

In stock

+ −

Creality PETG 3D Printer Filament (Yellow)

0.0

CODE: creality-PETG-3D-printer-filament-yellow

Brand NameCreality

100⁰⁰ ^AED

In stock

+ −

Creality PETG 3D Printer Filament (Transparent)

0.0

CODE: creality-PETG-3D-printer-filament-transparent)

Brand NameCreality

100⁰⁰ ^AED

In stock

+ −

Creality PETG 3D Printer Filament (Red)

0.0

CODE: creality-PETG-3D-printer-filament-red

Brand NameCreality

100⁰⁰ ^AED

In stock

+ −

Creality PETG 3D Printer Filament (Blue)

0.0

CODE: creality-PETG-3D-printer-filament-blue

Brand NameCreality

100⁰⁰ ^AED

In stock

+ −

Creality LD-002R LCD Resin 3D Printer

0.0

CODE: creality-LD-002R-LCD-Resin-3D-printer

CREALITY LD-002R LCD Resin 3D Printer BUILD AND MOTION : Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis. ANTI-ALIASING ： MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out. QUICK LEVELING ： Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare. PERFORATED PRINT PLATE ： Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it. AIR FILTER ： A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.

Brand NameCreality

1,299⁰⁰ ^AED

In stock

+ −

Creality HALOT-SKY Resin 3D Printer

0.0

CODE: creality-HALOT-SKY-resin-3D-printer

Creality HALOT-SKY is a new generation of flagship resin 3d printers. Unlimited innovation drives resin printing future Integral light source AI hardcore High agility slicing High stability Z-axis WiFi-APP intelligent control OTA online upgrade

Brand NameCreality

4,812⁰⁰ ^AED

In stock

+ −

Creality Ender-7 3D Printer

0.0

CODE: creality-ender-7-3D-printer

New breakthrough of speed, normal printing speed of the Creality Ender-7 3d printer is up to 250mm/s，enjoy instant high-speed printing while maintaining the same molding precision quality.

Brand NameCreality

2,999⁰⁰ ^AED

Out of stock

Creality Ender-6 Corexy 3D printer

0.0

CODE: creality-ender-6-corexy-3D-printer

Elegant Appearance： Ender-6 with a new look integrated all-metal chamber body matched with a transparent acrylic open door and blue corner. Ultra Silent Printing: Ender-6 is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise. TMC-2208 motherboard always ensures smooth movement in silence.

Brand NameCreality

2,199⁰⁰ ^AED

In stock

+ −

Creality Ender-5 Pro 3D Printer

0.0

CODE: creality-ender-5-pro-3d-printer

Creality Ender-5 Pro | Cubic-constructure 3d printer kit, dual Y-axis designed, silent motherboard included to avoid noise occurs, together with a filament sensor and removable platform, these features helps unlock the uninterrupted printing of 100% filament feed in-out.

Brand NameCreality

1,799⁰⁰ ^AED

In stock

+ −

Save 7%

Creality Ender-3 V2 3D Printer

0.0

CODE: creality-ender-3-V2 3D-printer

Ender-3 is a classic printer. For the inheritance of Ender-3, Creality research the upgraded printer Ender-3 V2. In the base of Ender-3, many upgraded components have upgraded on our latest released DIY 3d printer - Ender-3 V2.

Brand NameCreality

1,399⁰⁰ ^AED 1,299⁰⁰ ^AED

You save: 100.00 AED

In stock

+ −

Creality Ender-3 S1 Plus 3D Printer

0.0

CODE: creality-ender-3-S1-plus-3D-printer

Free filament/nozzle kitavailable as a gift now(gift sent randomly). Join the 200 who have pre-ordered our new Ender Series with upgraded build volume. Build Volume Upgrade - 300*300*300 mm Hassle-free CR Touch Auto-leveling "Sprite" Full-metal Dual-gear Direct Extruder 4.3-inch Touch Screen, Click to Control Synchronized Dual Z-axes, High Precision Printing Quick Assembly, Easy to Handle

Brand NameCreality

2,399⁰⁰ ^AED

Out of stock

Creality Ender-3 S1 3D Printer

0.0

CODE: creality-ender-3-S1-3D-printer

High-quality printing with "Sprite" direct extruder, CR touch automatic leveling, and dual z-axis synchronization. 96% pre-installed 6-step fast assembly Silent Motherboard, Decibel≤50dB Resumed Printing, Save Time and Filament Take out the Model in an Easier Way New UI Interaction with LCD Knob Screen 4.3-inch HD Color Screen

Brand NameCreality

1,899⁰⁰ ^AED

Out of stock

Creality Ender-3 Pro 3D Printer

0.0

CODE: creality-ender-3-pro-3d-printer

Product features MAGNET BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling. SAFE POWER SUPPLY: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hotbed to 110℃ in just 5 minutes. RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages. SEMI-ASSEMBLED KIT: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics. WHAT YOU GET: Creality Ender 3 Pro 3D printer, 12 months warranty, lifetime technical assistance and 24 hours professional customer service.

Brand NameCreality

1,199⁰⁰ ^AED

In stock

+ −

Creality Ender-3 Max 3D Printer

0.0

CODE: creality-ender-3-max-3D-printer

Powerful Hotend Kit-Extremely Precise Printing : Modular hotend with a heat-resistant copper nozzle enable rapid filament melting and smooth filament extrusion. Large Print Size-Max Workspace, Max Production : 300x300x340mm, a widen workspace for your creativeness.

Brand NameCreality

1,599⁰⁰ ^AED

In stock

+ −

Creality Ender 5 S1 3D Printer

0.0

CODE: creality-ender5-S1

Upgraded motion system for 2000mm/s² acceleration and up to 250mm/s (5 times) printing speed*. Feel the speed and passion of 3D printing now. Speedy to Realize Creative Ideas Higher Efficiency and More Eco-friendly Stand Firmly to Print Quality Models Direct Extrusion Adapted to Flexible Filaments Hotend Upgrade for High-temp Printing Get a Cool Model Promptly Explore with High-temp Filaments Quicker Expert-Level Calibration Straightforward Touch Screen UI Print in Multiple Ways

Brand NameCreality

2,199⁰⁰ ^AED

On backorder

+ −

Creality Ender 5 Plus Tempered Glass Build Plate Replacement (377*370mm)

0.0

CODE: creality-ender5-plus-tempered-glass

Ender 5 PLUS Tempered Glass Upgraded Build Plate Printing Surface Experience Pro-hesion- Our state-of-the-art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. Can be placed on top of any existing hotbed surface and be held in place with simple clips As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.

Brand NameCreality

149⁰⁰ ^AED

In stock

+ −

Creality Ender 3 S1 Pro

0.0

Up to 300℃ high-temp printing support multiple filaments "Sprite" full-metal dual-gear direct extruder 80N extrusion force for smooth feeding CR-touch automatic leveling accurate and efficient 4.3-inch LCD, brand new UI, easy to use 96% pre-installed six-step assembly

Brand NameCreality

2,149⁰⁰ ^AED

Out of stock

Creality CR-ABS 3D Printer Filament (Yellow)

0.0

CODE: creality-CR-ABS-3D-printer-filament-yellow

Brand NameCreality

100⁰⁰ ^AED

In stock

+ −

Creality CR-ABS 3D Printer Filament (Orange)

0.0

CODE: creality-CR-ABS-3D-printer-filament-orange

Brand NameCreality

100⁰⁰ ^AED

In stock

+ −

Creality CR-6 SE 3D Printer

0.0

CODE: creality-CR-se-3D-printer

accurate 3D printing is the result of a leveled bed. That's usually a challenging goal, though, because most 3D printers will present nozzle clogging, poor adhesion, and generally unleveled-related issues that compromise the quality of prints.

Brand NameCreality

1,799⁰⁰ ^AED

Out of stock

Creality CR-6 MAX 3D Printer

0.0

CODE: creality-CR-6-MAX-3D-printer

Creality CR-6 Max FDM 3d printer, large print size 400x400x400mm，makes you enjoy the DIY fun, realizes your unlimited creativity, and satisfies you with more choices. Large print size Double pull rod + dual Z-axis Intelligent auto-leveling Dual Y-axis design Excellent silent motherboard Precise nozzle kit

Brand NameCreality

3,699⁰⁰ ^AED

In stock

+ −

Creality CR-5 Pro (High-temp Version) 3D Printer

0.0

CR-5 Pro (High-temp Version) is a fully enclosed 3d printer, more stable. The maximum nozzle temperature is increased from 260°C to 300°C, with a high power fan, excellent heat dissipation, and smooth extruding. Equipped with BL-touch for Automatic Leveling Up to 300°C Printing Temperature All Metal Frame and Fully Enclosed Structure 300x225x380mm Largest Print Size Noiseless Printing Filament Detection Sensor & Resume Printing from Power Outage

Brand NameCreality

4,399⁰⁰ ^AED

In stock

+ −

Creality CR-30 3D Printer

0.0

CODE: creality-CR-30-3D-Printer

Creality CR-30, Batch Print Models, Infinite Z-Axis for Long Model Production, Up to 200-hour Continuous Operation without Malfunction, Stable Core-XY Structure, Print size: 300x300x400mm Batch Print Models Infinite Z-axis Printing Durable Operation with Stability Intelligent Protection System Sturdy Structure for Precision Printing Dual-gear Metal Extrusion System

Brand NameCreality

4,599⁰⁰ ^AED

+ −

Creality CR-10S Pro V2 3D Printer

0.0

CODE: CR-10S-Pro-V2-3D-Printer

Creality 3D Printer CR-10S Pro V2 with BL Touch Auto-Level, Touch Screen, Large Build Volume 3D Printer 300mmx300mmx400mm with Capricorn PTFE BL-TOUCH Included : Matrix Automatic Leveling, quality Bill Touch automatic leveling device. And the CR-10 Pro V2 will...

Brand NameCreality

2,799⁰⁰ ^AED

In stock

+ −

Vendor productsProducts found: 416